HYDKA 3S® – Hydraulic software for wastewater treatment plants (WWTP) and open channels
Areas of application, objectives & benefits
HYDKA 3S® calculates flows, water level positions (pressure lines) and energy lines. This can involve complex hydraulic systems, e.g. wastewater treatment plants, with branched and intermeshed channels and pipelines in single and multi-line systems.
- Dimensioning channel systems and pipelines
- Check flow distributions and minimize losses
- Ensure desired flow conditions at your wastewater treatment plant
- Review existing equipment under changed loads and process concepts
- Get assistance in interpreting actual hydraulically related operational problems that occur
Program features
The following outline gives you an overview of further functionalities of our software HYDKA 3S®.
General program features
- Fast and easy model creation
- Comprehensive model validation
- Steady-state hydraulic calculations
- Load case calculations with adjusted inflows and/or water levels
- Longitudinal hydraulic sections
- Graphical output of results
Hydraulic elements
- Individual losses for pipes and channels
- Prismatic and non-prismatic channels
- Collection channel and spillway edge
- Tooth sill and outlet
- Submerged pipe and rake
- Node and pipe
Results
- Flow rates, energy lines, and water level positions that result depending on the modeling and the set boundary conditions of the system (water level, pressures, and inflow or outflow)
- Key parameters, such as flow velocities and Froude numbers
- Longitudinal hydraulic sections – showing bed, bank or profile heights, water levels / pressure heads, energy heights, geometry of elements, flows and flow velocities
- Result tables
